Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - byfun

Pages: [1] 2
1
ezPower / Re: Printer & Cashdrawers
« on: November 20, 2020, 07:54:27 AM »
Checked Open connect to Printer is enabled.

But drawer still doesnt work . Anything else i need to check ?

2
ezPower / usb pole display
« on: November 19, 2020, 06:12:22 AM »
Does ezpower 14 work with usb pole display ?

I am using a wincor nixdorf beetle fusion pos. It came with the pole display but it a usb based type. Cant seem to get it work in Ezpower.


BA63USB - Diebold Nixdorf
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.dieboldnixdorf.com/-/media/diebold/ag-downloads/poslotterysystems/manuals/beetle/beetle_fusion_cust_display_ba63usb_operating_manual_english.pdf&ved=2ahUKEwj4mevz447tAhXEbCsKHQSpBdsQFjAAegQIBBAC&usg=AOvVaw21FI212_6P0u1F6r4_9jFM

3
ezPower / Re: Printer & Cashdrawers
« on: November 16, 2020, 02:31:32 AM »
Recently old Epson parallel printer spolited and switch to a china Xprinter USB thermal printer. Printing work fine but the cashier box wont pop out.

I suppose there is some setting i need to do ?

4
ezPower / Re: How to restore from a old hardisk ?
« on: November 14, 2020, 03:22:59 AM »
Another question about function button sales screen. Its to the extreme left columm of the sales screen.

From the configuration, we can only modify 4 buttons. But on the sales screen it show 6 button. Top button being a arrow up/down which is disabled and the bottom button a FINISH button.

How to customise the top and bottom button ? Thanks

5
ezPower / How to restore from a old hardisk ?
« on: November 11, 2020, 05:48:20 AM »
Hi ,

Using ezpower version 14. The POS hardware is faulty but hardisk is still good. Decide to replace with a new hardware.

I know that i need to install ezpower on the new POS. But how to port the data from the old hardisk to the new system like which folders to copy over ..etc ?

Thanks

6
ezPower / Re: Pole Display does not show total.
« on: July 24, 2017, 06:05:11 AM »
I using cash as the only payment mode, i assigned the CASH icon to the function button to do fast payment. I didnt use the Change Due screen.

So in my case, no payment screen and change due screen. Its sort of fast service kiosk. Anyway to resolve this ? The old version v10 using this setup i remember dont have this issue (seem so).

7
ezPower / Pole Display does not show total.
« on: July 23, 2017, 09:58:00 PM »
Using Ez14. The pole display does not display the total price that the customer need to pay.

I am using 2 line display Epson emulation.

The item description on first line.
Qty and Price on 2nd line.

Using cash only payment mode. When i press cash and drawer come out. It just show "Thank You"

8
ezPower / Re: Migrating Ezpower 14 to a new pc.
« on: July 23, 2017, 09:39:48 PM »
Thanks got it working. Figured it out when i read that win7 using different directory. My old one was on an XP

9
ezPower / Migrating Ezpower 14 to a new pc.
« on: July 22, 2017, 03:46:24 AM »
Would like to know how to migrate the current data and layout on old machine to a new one ?

I have copied the Ezpower folder over but when the program run, the old layout is not there.

10
ezPower / "Extend" price not shown on print receipt.
« on: February 24, 2015, 09:40:14 PM »
Hi,

Recently reinstalled my PC because hardisk spolit. Everything is working except receipt printout "Extend" and the price is only shown half. How to fix this issue ? Seem like the width of the paper is not enough.

I tried changing the Font to "Arial" it did show the "Extend" but the alignment was very off.
 
Thanks


11
ezPower / Text Overlay on Ezpower POS
« on: October 29, 2014, 08:16:35 PM »
To continue from the previous thread which has gone missing from this forum.

Any recommended text overlay hardware that has proven to work with Ezpower ?

I am using Geovision now and the output is not desirable.

12
ezPower / Re: "No printer" message in pos operation
« on: May 04, 2014, 07:58:13 AM »
Ok manage to get the "Sales Label" copy and set to 0 and problem resolved.

13
ezPower / Re: "No printer" message in pos operation
« on: April 25, 2014, 12:21:32 AM »
This is already done but the error still exist .

14
ezPower / Re: "No printer" message in pos operation
« on: April 23, 2014, 08:25:00 PM »
No it just pop out "No printer". I'm also not printing any receipt, by default i set it to no printing.

But i do have a normal printer set as default. Mainly use for printing report and stock taking and the reporting or stock taking report is working fine.

15
ezPower / "No printer" message in pos operation
« on: April 22, 2014, 06:13:26 PM »
Hi,

Encountered "No printer" message every time a pos transaction was done. My POS has a printer connected to it. How to remove this prompt ?

Pages: [1] 2